They are suitable for transferring liquids containing impurities up to 3 mm in size. The hydraulic components: nylon impeller and cast iron scroll allow them to be used with water, emulsions and oily substances in general, with a viscosity not exceeding 21 cSt (3° Engel). The temperature of the liquid must not exceed 70°C.
Commonly used on
They are installed on the side of the tank to allow the liquid to enter directly into the suction port (see figure). In cases where the liquid is particularly dirty, it is advisable to construct the tank in compartments to allow the sludge to settle before it is pumped out of the pump.
SOME MODELS MAY BE AVAILABLE IN 2-3 WEEKS
Reference: IMM63/A
Brand: SACEMI
Three-phase electric pump SACEMI IMM 63A They are suitable for transferring liquids containing impurities up to 3 mm in size. The hydraulic components: nylon impeller and scroll, aluminium pump body, allow use with water, emulsions and oily substances in general, with viscosity not exceeding 21 cSt (3° Engel). The temperature of the liquid must not...
Reference: SPV18
Brand: SACEMI
Three-phase electric pump SACEMI SPV 18 They are suitable for transferring liquids containing impurities up to 3 mm in size. The hydraulic components: impeller, scroll and pump body in PBT allow them to be used with water, emulsions and oily substances in general, with a viscosity not exceeding 21 cSt (3° Engel). The temperature of the liquid must...
Reference: SPV50
Brand: SACEMI
Three-phase electric pump SACEMI SPV 50 They are suitable for transferring liquids containing impurities up to 3 mm in size. The hydraulic components: impeller, scroll and pump body in Nylon, allow them to be used with water, emulsions and oily substances in general, with a viscosity not exceeding 21 cSt (3° Engel). The temperature of the liquid...
Reference: AU56
Brand: SACEMI
Three-phase electric pump SACEMI AU56 They are suitable for transferring clean liquids containing impurities not exceeding 0.03 mm. The hydraulic components: brass impeller, cast iron back plate and aluminium pump body, allow them to be used with emulsions, oily substances and liquids in general as long as they are non-oxidising for the construction...
They are suitable for transferring liquids containing impurities up to 3 mm in size. The hydraulic components: nylon impeller and cast iron scroll allow them to be used with water, emulsions and oily substances in general, with a viscosity not exceeding 21 cSt (3° Engel). The temperature of the liquid must not exceed 70°C.
Commonly used on
They are installed on the side of the tank to allow the liquid to enter directly into the suction port (see figure). In cases where the liquid is particularly dirty, it is advisable to construct the tank in compartments to allow the sludge to settle before it is pumped out of the pump.
SOME MODELS MAY BE AVAILABLE IN 2-3 WEEKS
