- There are no more items in your cart
- Shipping
- Total €0.00
- PRODOTTI IN OFFERTA
- Accident prevention
- Installers' equipment
- Equipment STIHL
- Compressors
- Electric pumps
- Electric pumps machine tools
- Power Tools
- Electrical material
- Rupes World
- Hoover motors
- Electric motors
- Industrial cleaning
- Power tool spare parts
- Spare parts for high-pressure cleaners
- Portable climate solutions
- Tool cases
- Ventilation
Brands
Three-phase electric pump SACEMI AP 100A
AP100/A
Three-phase electric pump SACEMI AP 100A
Suitable for transferring liquids containing impurities up to 2 mm in size. The hydraulic components: cast iron impeller and scroll, cast iron/steel pump body allow them to be used with water, emulsions and oily substances in general, with a viscosity not exceeding 21 cSt (3° Engel). The liquid temperature must not exceed 90°C.
Applications
Commonly used on
- machine tools (milling machines-turning centres)
- glass processing machines
- surface treatment plants
- filtration plants
They are normally installed on a tank with a capacity proportionate to the flow rate, approximately 6-7 cm from the bottom. It is important to check that the maximum liquid level in the tank always remains 3-4 cm lower than the support flange (see figure). In cases where the liquid is particularly dirty, it is advisable to construct the tank in compartments, to allow the sludge to settle before it is pumped out of the pump.
SOME MODELS MAY BE AVAILABLE IN 2-3 WEEKS
Description
Product Details
AP100/A
5 Items
New product
Three-phase electric pump SACEMI AP 100A
Suitable for transferring liquids containing impurities up to 2 mm in size. The hydraulic components: cast iron impeller and scroll, cast iron/steel pump body allow them to be used with water, emulsions and oily substances in general, with a viscosity not exceeding 21 cSt (3° Engel). The liquid temperature must not exceed 90°C.
Applications
Commonly used on
- machine tools (milling machines-turning centres)
- glass processing machines
- surface treatment plants
- filtration plants
They are normally installed on a tank with a capacity proportionate to the flow rate, approximately 6-7 cm from the bottom. It is important to check that the maximum liquid level in the tank always remains 3-4 cm lower than the support flange (see figure). In cases where the liquid is particularly dirty, it is advisable to construct the tank in compartments, to allow the sludge to settle before it is pumped out of the pump.
SOME MODELS MAY BE AVAILABLE IN 2-3 WEEKS