- There are no more items in your cart
- Shipping
- Total €0.00
- PRODOTTI IN OFFERTA
- Accident prevention
- Installers' equipment
- Equipment STIHL
- Compressors
- Electric pumps
- Electric pumps machine tools
- Power Tools
- Electrical material
- Rupes World
- Hoover motors
- Electric motors
- Industrial cleaning
- Power tool spare parts
- Spare parts for high-pressure cleaners
- Portable climate solutions
- Tool cases
- Ventilation
Brands
Three-phase electric pump SACEMI IMM 40
YT40IMAAA120
Three-phase electric pump SACEMI IMM 40
They are suitable for transferring liquids containing impurities up to 3 mm in size.
The hydraulic components: impeller, scroll and pump body in PBT, allow them to be used with water, emulsions and oily substances in general, with viscosity not exceeding 21 cSt (3° Engel).
The temperature of the liquid must not exceed 70°C.
They are commonly used on
- machine tools (milling machines-turning machines-drills)
- glass processing machines (TRI version)
- air-conditioning systems
They are normally installed on a tank with a capacity proportionate to the flow rate, approximately 2-3 cm from the bottom.
It is important to check that the maximum liquid level in the tank always remains 3-4 cm lower than the support flange (see figure).
In cases where the liquid is particularly dirty, it is advisable to construct the tank in compartments, to allow the sludge to settle before it is pumped out of the pump.
Description
.jpg)
.jpg)
Product Details
YT40IMAAA120
4 Items
New product
Three-phase electric pump SACEMI IMM 40
They are suitable for transferring liquids containing impurities up to 3 mm in size.
The hydraulic components: impeller, scroll and pump body in PBT, allow them to be used with water, emulsions and oily substances in general, with viscosity not exceeding 21 cSt (3° Engel).
The temperature of the liquid must not exceed 70°C.
They are commonly used on
- machine tools (milling machines-turning machines-drills)
- glass processing machines (TRI version)
- air-conditioning systems
They are normally installed on a tank with a capacity proportionate to the flow rate, approximately 2-3 cm from the bottom.
It is important to check that the maximum liquid level in the tank always remains 3-4 cm lower than the support flange (see figure).
In cases where the liquid is particularly dirty, it is advisable to construct the tank in compartments, to allow the sludge to settle before it is pumped out of the pump.